02-21-2017 02:31 AM - edited 03-17-2019 09:36 AM
Team,
A quick help here please.
Setup is as below
IP Phone==>CM1[India]==>ITSP[IND]==>WAN==>CM2[USA]==>Ip phone .
First of all,this is not a Cisco setup. But certainly it is VOIP setu
From CM india we have a h.323 trunk to CM USA with 20 channels. And through that you can call the IP phones which is registered to CM USA and same time you cannot call any other phones.
Just want to know what you call this setup and what is the take on this by DOT INDIA.
Solved! Go to Solution.
02-21-2017 04:17 AM
Hi Mazoor,
There is a very nice thread by our friend Vivek on TRAI regulations with the supported and unsupported scenarios
https://supportforums.cisco.com/blog/12539601/trai-india-regulations-voipip-telephony
Please check the same and if you have any queries you may post here.
Manish
02-21-2017 04:17 AM
Hi Mazoor,
There is a very nice thread by our friend Vivek on TRAI regulations with the supported and unsupported scenarios
https://supportforums.cisco.com/blog/12539601/trai-india-regulations-voipip-telephony
Please check the same and if you have any queries you may post here.
Manish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide