Issue with configuring POTs for in Multiple PRI Environment

[Syed Kazi]

Hi I having 4 PRI's configured on a Single VG 5350 this is our IPCC Environment and All Extensions are Internal Extension and no DID has been used. Incoming is working fine and Outgoing its taking all the Four PRI's in Round Robin Fashion. But our Requirement that Specific Extensions should go via Specific PRI.

I have Tried many ways which are available online but i could'nt Succeed.

Please Help.

[Harmit Singh]

Hi Syed,

Take a look at this:

https://supportforums.cisco.com/docs/DOC-24098

It should help address your issue.

HTH.

Regards,

Harmit.