cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
780
Views
0
Helpful
2
Replies

Issues registering 9971 with CM8

nbourke2000
Level 1
Level 1

I'm new to callmanager, just getting my head around things. I have a CM 8 set up in a VM and two 9971s. My objective is to get the phones up and registered and make a video call between the two. I switched on auto registration and the phones aren't coming up. Status on phone shows TFTP TImeout.

I've tried static config of the phone in CM before i tried auto-registration, didn't work then either

I've tried both on Voice VLAN configured ports and on a flat network

I have no DNS on the network and so i changed the server name to the IP of the server

i've set option 66 & 150 on DHCP to the IP of the CM

SIP as default for auto-registration

Auto-reg not disabled in CM config

Extensions range defined

I can't figure out what i'm doing wrong.

1 Accepted Solution

Accepted Solutions

asandborgh
Level 4
Level 4

Hi,

Is the Callmanager and other appropriate services running?  If not see CUCM Servicability....

HTH,

Art

View solution in original post

2 Replies 2

asandborgh
Level 4
Level 4

Hi,

Is the Callmanager and other appropriate services running?  If not see CUCM Servicability....

HTH,

Art

nbourke2000
Level 1
Level 1

Issue resolved by TAC replacing faulty phone.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: