CUCM 9.1, VCS Control X8,6
From jabber I want to dial to EPs registered to VCS Control using <alphanumeric alias>@vcs.domain.
- On CUCM I have created a sip trunk that points to VCS Control (I also created proper xforms on the VCS Control).
- On CUCM I created the SIP route pattern of 'vcs.domain' which points to the trunk
From Jabber for windows, if I dial an EP with a VCS Control registered alias of <numeric alias>@vcs.domain, this call successfully connects. But if I dial a VCS Control registered EP with an alias of <alphanumeric alias>@vcs.domain, the call fails (checking VCS Control's event log, this call attempt never makes it to the VCS Control).
Will jabber for windows dial a URI that is <alphanumeric>@vcs.domain? Or is Jabber/CUCM limited to dialing only <numeric>@vcs,domain? ((I know CUCM has the directory URIs that can be "dialed"-- but this is actually dialing the numeric DN assigned to the directory URI).
Thanks for any guidance...
Please check the following
- Do rate useful posts -
Thanks Jaime, I'm in the process of checking this.
Just to be sure, this is checked/changed within the JfW config file contained on the ftp server?