cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
6808
Views
0
Helpful
4
Replies
Highlighted
Beginner

Jabra headset and Cisco 7942 Aux port

Hi ,

Two of our employees are using Jabra headsets. They are currently working over the analog headset port, but they would like to use the digital converter cable the headset came with to improve performance. How should I turned it on to utilize the auxiliary port in behind the phone.

Head model:       Jabra GN9300e

Phone model:     7942

Any help would be much appreciated.

Saima

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

saima.harris wrote:

Thanks for the quick response .

How can I configure it on CME

Saima

I just searched the forums for "CME Headset Enable" and found this document as the second link.

https://supportforums.cisco.com/docs/DOC-9928

Anthony Holloway

Please use the star ratings to help drive great content to the top of searches.

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Community Legend

Hi Saima,

With the Cisco 7942, you would leverage the setting under

the product specific porting of the config via device>phone

and set Wireless Headset Hookswitch Control to Enabled

http://headsetplus.com/PDF/Jabra-EHS-guide.pdf

Cheers!

Rob

"And if I should fall behind
Wait for me" - Springsteen

Highlighted

Thanks for the quick response .

How can I configure it on CME

Saima

Highlighted

saima.harris wrote:

Thanks for the quick response .

How can I configure it on CME

Saima

I just searched the forums for "CME Headset Enable" and found this document as the second link.

https://supportforums.cisco.com/docs/DOC-9928

Anthony Holloway

Please use the star ratings to help drive great content to the top of searches.

View solution in original post

Highlighted
Beginner

I believe you can find your answer here:

http://headsetplus.com/category99_105/index.html

Content for Community-Ad