02-14-2012 10:21 PM - edited 03-16-2019 09:36 AM
Hi All,
We have recently upgraded Call Manager from 7.5.1 to 8.5.1 SU1. In 8.5.1 we have an option to add LDAP filter. My intention is to retrieve only the IP Phone users from AD as it is showing all the users in corporate directory who even doesnt have IP phones . So i need the know what need to be entered in the parenthesis () .
Regards
Sankar.
Solved! Go to Solution.
03-21-2012 01:40 AM
Great stuff.
Please remember to rate useful responses, and mark as 'answered' if appropriate.
Principal Engineer at Logicalis UK
Please rate helpful posts...
02-15-2012 01:42 AM
Hi
The default filter is like so:
(&(objectclass=user)(!(objectclass=Computer))(!(UserAccountControl:1.2.840.113556.1.4.803:=2)))
So to add a clause to match only non-blank ipphone fields, you can use this:
(&(objectclass=user)(ipphone=*)(!(objectclass=Computer))(!(UserAccountControl:1.2.840.113556.1.4.803:=2)))
Regards
Principal Engineer at Logicalis UK
Please rate helpful posts...
02-15-2012 02:08 AM
Hi Aaron,
Thanks a ton. I will let you know after configuring the same.
Regards
Sankar.
03-20-2012 11:54 PM
Hi Aaron,
I have applied the filter and it is working perfect. Thanks a ton.
Regards
Sankar.
03-21-2012 01:40 AM
Great stuff.
Please remember to rate useful responses, and mark as 'answered' if appropriate.
Principal Engineer at Logicalis UK
Please rate helpful posts...
05-17-2012 08:19 AM
Aaron,
Thanks Aaron, this was a great help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide