07-25-2013 01:30 AM - edited 03-16-2019 06:32 PM
How can I confirm via the CUCM server itself what licensing type I have on it, and available license for phones etc..?
Thanks
07-25-2013 01:46 AM
Hi,
What is the CUCM version u are using?
regds,
aman
07-25-2013 01:53 AM
Hi,
We are on 8.5
Thanks
07-25-2013 01:56 AM
We also have a seperate cluster running 6.3, some sort of Business Edition.
How do I also find out available license for this?#
Thanks
07-25-2013 02:03 AM
Hi,
From Cisco Call Manager Administration ----> System --->Licensing ----> License Unit report.
You will get Phone license feature with Units Authorised, Units Used and units remianing.
Same u would get for CCM Node license feature.
regds,
aman
07-25-2013 02:09 AM
Thanks for that.
When buying phones, do they need to come with licences or can i just buy the phone if the CUCM has units remaining?
07-25-2013 02:37 AM
Hi,
If u have enough licenses[Device license unit {DLUs} ] , then, u can just buy phones.
regds,
aman
07-25-2013 02:53 AM
I have checked and I have 400 units remaining.
Does this mean I can buy any phones without licences now and register them on the CUCM?
07-25-2013 03:26 AM
Hi,
Number of units consumed depends on IP phone Model.
You need to refer DLU calculator. Please refer the discussion
https://supportforums.cisco.com/thread/293098
regds,
aman
07-25-2013 03:45 AM
Thank You for your help.
Last query :-)
I'm trying to figure out how many DLU a CP-6945 requires but can't see it on the calculator or within the System / Licensing / Calculator.
Any ideas where I can get this info?
07-25-2013 04:18 AM
Hi,
I think it would consume at least 3 units.
You can to System---licensing----License unit calculaotr and find for the 6945 model.
regds,
aman
07-25-2013 04:32 AM
Hi,
When looking on my CUCM 8.x version - I can see 6945 under licensing calculator.
However when looking on my other cluster (6.x) there is not 6945 listed under Licensing Calculator.
Does this mean I cannot use these phones on my 6.x Cluster?
07-25-2013 04:38 AM
Hi,
You require min. CUCM version 7.1(2) to support 6945.
Please refer the datasheet.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10326/data_sheet_c78-637812.html
Please let me know what is the number of DLU it is showing for 6945.
regds,
aman
07-25-2013 04:45 AM
Hi,
Thank you.
4 DLU was showing on my CUCM 8.x for the 6945.
Thanks again
07-25-2013 04:59 AM
thanks for the ratings....
regds,
aman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide