Licenses for Cisco Telephone in a CME

[luislozano]

Hi all and thaks in advance.

I have a question about licensing in CUCME and phones.

We have the next configuration:

• Cisco CISCO2921/K9
• Software Version  15.0(1)M3
• CME 7.1. We have licensed to 50 seat.
• In addition, we have 16 Cisco 7925G, 8 Unified SIP Phone 3911, 15 Cisco 7911G and two Cisco 7942G. All this terminal were bought with the SPARE code and the corresponding license to connect to CME ("SW-CCME-UL").

Now, when we are connecting all the terminal to the CME, the system don´t ask me for any license and i can connect all the terminal without any problem. Is it correct? The license is only a paper that say that we are in law about license terms and i haven´t to put in any moment to the CME?

[Amer rajai Sha'er]

yes , you can say that.

[luislozano]

So it´s an honor based. Is it?

And in the other hand, how could i see how many seat i have used? I readed about hte DLU or something like it, and i don´t know if my Cisco terminal are using more that one seat per one.

But the firts of all....many THANKS

[Hythim Ali El Hadad]

DLUs is in cucm not cucme

in CUCME, the number of supported ip phones is per your router model

try this command in your router

telephony service

max-ephone ?

so you'll see the max supported

[Hythim Ali El Hadad]

Amer,

please I need to confirm for CME 8.5, do i need any kind of license for the CME feature to be activated or to add any phones to CME or it is still paper only not needed for any activation

Thank you very much