cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
824
Views
0
Helpful
3
Replies

Licensing for BE6K Redundancy

Hi All,

We've deployed Cisco BE6K and we are required to do redundancy for CUCM & CUC do we need to have separate UWL license for the redundant servers ?

Please help.

Best regards

kennedy

1 Accepted Solution

Accepted Solutions

Joseph Martini
Cisco Employee
Cisco Employee

No you do not need separate CUWL licenses.  The reason is that licenses on CUCM 9.x and later which is when CUWL starts to be used are not node or server based but user based instead.  You can have as many servers for redundancy as you want without changing the number of licenses you have.

View solution in original post

3 Replies 3

Joseph Martini
Cisco Employee
Cisco Employee

No you do not need separate CUWL licenses.  The reason is that licenses on CUCM 9.x and later which is when CUWL starts to be used are not node or server based but user based instead.  You can have as many servers for redundancy as you want without changing the number of licenses you have.

Hi Joseph,

Many Thanks for your response.

Best regards

Kennedy

Joe,

Long time..!! We have missed you on the forum! Welcome back..Bet you have been busy..

Please rate all useful posts

"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

Please rate all useful posts
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: