Limit Max Calls on a PRI

anupamjain · ‎01-31-2013

Hi,

We are using 3825 and 3945. For one our PRIs, we want to limit the no. of simultaneous calls to 10 (instead of 30). Searched through the docs but couldnt find any parameter or dial-peer config to do that. Is this achievable?

Regards

Anupam

ronpatel · ‎02-01-2013

Hi

If you have one dial peer POTS for that PRI you can configure max-conn under that dial peer.

Or Else you can have fractional PRI configured. I believe fractional PRI is not supported but worth a try.

Regards

Ronak patel

Rate Helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Anas Abueideh · ‎02-01-2013

Hi,

do u have fractional PRI ?

Anas

Sent from Cisco Technical Support Android App

Jaime Valencia · ‎02-01-2013

Do you mean inbound? outbound?? both??

And practional PRIs are supported, as long as you're using H323. We do not support them, if you want to use MGCP.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Chris Deren · ‎02-01-2013

As my colleagues already suggested simply configure the controller with number of channels you desire.

Chris