Lint group "Line group members" "data gathering

[sameermunj]

We are using CUCM cluster setup where CUCM version 10.5.2.12901-1 ...there are total 80 Line groups are created...

Business needs information about the "Line group members" is there any way to export this information  

[Abhay Singh Reyal]

You can use BAT to export the information regarding the Line Group Members. Choose the option of Line Group to export when you use BAT to export configuration data from CUCM.

Find this below link helpful for CM 9

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/bat/9_1_1/CUCM_BK_C271A69D_00_cucm-bulk-administration-guide-91/CUCM_BK_C271A69D_00_cucm-bulk-administration-guide-91_chapter_0111110.html

HTH
Regards

Abhay

Kindly rate all helpful posts !!!

[Jitender Bhandari · Accepted solution]

Hi,

You can do what Abhay says or, you can also go to Call Routing -> Route Plan Report on right top you will get an option to get the information in CSV file.

(Rate if it helps)

JB

[sameermunj]

Hello Jitendra,

This is the most easy way to filter out ..thanks

[HARIS_HUSSAIN]

I have CUCM 11.5. When i view file in CSV , It only list the hunt pilot number but do not list the Line Group Members.