List of Downloaded Files

[mrmhar1408]

Hi Guys,

I am looking to list all the upgrade files downloaded to the call manager or to the unity connection

Anyone has an idea how to list them ?

[Aman Soi]

Hi,

You can use the command file list tftp * from CLI of CUCM.

regds,

aman

[Carlo Poggiarelli]

Hi.

Also show version active through CLI should show all installed software.

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

[mrmhar1408]

Thanks Guys for the response, but i downloaded the files using FTP not TFTP and there is no file list FTP

i need that because sometimes i get error in installation and i need to re-install the same file without download it again.

[Carlo Poggiarelli]

Hi

file list activelog installed_options here are the istalled files

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

[mrmhar1408]

Great Carlo. I could see the downloaded file

the question now, How i can re-install the software using the downloaded file ?

[Carlo Poggiarelli]

Hi.
Unfortunately this is not an option :(
What you can do is download files from cucm and use them again via FTP/SFTP.
To get files use
file get activelog installed_options/fileyouneed


HTH

Regards

Carlo

Sent from Cisco Technical Support iPhone App

[mrmhar1408]

dear,

i don't want to get it, I need to start install the file in case i get error in the installation and i want to try again

[Carlo Poggiarelli · Accepted solution]

Hi.
You always need to upload it again via ftp or sftp.

Regards

Carlo


Sent from Cisco Technical Support iPhone App

[Aman Soi · Accepted solution]

Hi ,

After u download the files from Cisco site, u can verify the MD5 checksum before uploading to Call Manager and compare.

As said by Carlo, u need to use sftp software to upload the files in call manager cluster.

at the end, you Restart the tftp service .

regds,

aman