10-31-2013 09:10 AM - edited 03-16-2019 08:10 PM
Have been looking for some explaination of what events and inforamtion is contained in each one of the log files. looking to do some troubleshooting and I would like to try and look at the right file and not have to sequentially look at each file.
Is there a list?
Thanks.
10-31-2013 02:08 PM
Here is a list of the log files and descriptions:
Audio 0-8: One log per AUDIO DSP, if they are empty it is a good sign.
Application.log: Debug and application info. Here you will find H.323 messages, call setup etc.
Main.log: Process monitoring, typical you should look here if the system boots.
All.log: includes all logs. Nice for looking at something chronologically
Scriptbuffer.xml: Is used for video. Includes xml info about communication between video controller and video subsystem.
Statedump.xml: Pretty much the same as scriptbuffer.xml.
Video0-9: Is logs for the video ARM processors, typically transcoding and mixing of video signals.
Videocontroller.log: Is for the video controller. Typically tells the system which resolution to encode and decode. 30 and 60 etc.
Videogw0-9: Is the DSP logs. The DSPs will do encoding and decoding of video.
VPE0-9: Video Processor Engine. The video inputs which also is connected to the FPGAs. Typically problems with the video inputs and FGPA.
11-01-2013 08:21 AM
Enrico,
This is good information.
Specifically, I have a C20 running TC6.2.1 that seems to be loosing pairing with its touch panel and I am wondering which log to look at and if there is a specific string to be looking for.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: