Looking For 3rd Party SIP sets for CUCM

[douglas.heppler]

Hello,

I'm looking for a couple of alternatives to using Cisco hard phone sets. I have a RFP that requires storage up to -30 degrees celcius and most Cisco sets are only good to -10 degrees. Looking for a variety, one line all the way to 12 - 16 buttons and compatiable to most application features. Any suggests would be greatly appreciated.

[Rob Huffman]

Hi Douglas,

Have a look at this "cool" IP Phone built for harsh environments;

From Cisco partner;

Coleman Technologies, Inc. - EnviroXtreme

7961G/62G EnviroXtreme

Environmental
- Operating temperature:
-4°F to 131°F (-20°C to 55°C)

- Relative humidity: 10 percent to
95 percent (noncondensing)

- Storage temperature:
-40°F to 158°F (-40°C to 70°C)

http://www.alloy.com.au/docs/EnviroXtremePhone_stamped.pdf

Cheers!

Rob

[Joseph Martini]

That's an impressive phones, I've never seen those before (5 stars for that).  Thanks for sharing.

[ShivaNaidu]

If you're looking for third-party SIP sets (SIP phones) to use with Cisco Unified Communications Manager (CUCM), there are several options available in the market. While Cisco primarily promotes its own IP phone models for seamless integration with CUCM, many third-party SIP phones can be configured to work with CUCM as long as they support SIP (Session Initiation Protocol).

Here are the few IP Phone list: https://www.myithub.com.au/voip/ip-phones/cisco-phones/