cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
310
Views
0
Helpful
2
Replies

Looking for a little CUCM 12.5 BAT guidance.

chuck47172
Level 1
Level 1

Yesterday, I ran an export job that still showed a status as running this morning.
I stopped that job and then deleted it.

Next, I decided to run a completely different export job that is now stuck in a pending status.
I see no other jobs running that may cause that.
Could CUCM still think yesterday's job is still there and running?
How would you check for that?
Is there some sort of command line on the pub that will show what's going on?

I'm thinking that I may have to restart tomcat service on the pub or maybe reboot the pub if a tomcat restart doesn't fix it.

1 Accepted Solution

Accepted Solutions

Given those symptoms, I would start by stopping all jobs and restarting the Bulk Provisioning Service. Then try running a simple job to see if it completes. If that does not work, let us know.

Maren

View solution in original post

2 Replies 2

Given those symptoms, I would start by stopping all jobs and restarting the Bulk Provisioning Service. Then try running a simple job to see if it completes. If that does not work, let us know.

Maren

chuck47172
Level 1
Level 1

restarting Bulk Provisioning Service was the fix! Thanks Maren!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: