Losing connectivity to PC's behind 7945

[markmonteleone_2]

I have some 7945's that register to CUCM 8.5.x.

The reg fine and pc behind commicates without issue.

Strange thing is after a certain amount of time, the PC seems to lose connectivity after a few hours or few days.

The PC was and is fine without the 7945 inline.

Using Brocade FCX648_HPOE

Strange thing is I have 6941's working fine at that site and have replaced the 7945's with multiple new known working phones.

Any idea's?

[paolo bevilacqua]

Update phone firmware.

If still trouble, you will need to look at the third-party switch.

[ciscovoiceguy]

Mark,

Is it happing only with Cisco 7945 Phones or all the phones in your organization? If its with only 7945 Model phones try factory default setting on the phone

[Kevin Monteiro]

Hi Mark,

1>  try swapping the phone & try changing the cable.

2>  Factory reset the phone.

Regards,

Kevin Monteiro