Map outgoing call of some user on specific FXO port

[nicanor00]

Hi

I have CUCM 8 and cisco 2900 voice gateway with FXO port

I need to configure the 2900 voice gateway

I I would like to map outgoing call of some group of user on specific fxo port without any code

The number that user want to call should be dialed directly

user 2000, 2002, 2003, 2004 should use voice port 0/0/1

user 2005, 2006, 2007, 2008 should use voice port 0/0/2

user 2010, 2022, 2063, 2064 should use voice port 0/0/1

All other user should use voice port 0/0/3

Ho can I configure the voice gateway ?

[paolo bevilacqua]

This is often asked if you had searched

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml

[nicanor00]

Hi and thanks for reply

I read this document and I tried this to send outgoing call of user 2002 on port 0/1/1

But it is not working

user number that I want to call 6789809830

dialed number 6789809830

dial-peer voice 10 voip

translation-profile incoming Phone2002

answer-address 2002

voice translation-profile Phone2002

translate called 10

voice translation-rule 10

rule 1 /^/ /180/

dial-peer voice 180 pots

destination-pattern 180T

port 0/1/1

Please help

[nicanor00]

Please  I need help