04-26-2016 09:51 AM - edited 03-17-2019 06:43 AM
Hi All,
Can somebody please help me out on what is the maximum number of IOS software MTP sessions on ISR 4000 boxes?
I tried to google it, but with any luck so far.
Thanks in advance!
Regards,
Tibor
04-26-2016 11:16 AM
Hi ,
As most of engineering /technoogy answer are " it depends" .how much CPU youa are willing to sacrifice.
however i believe for 4000 series for 50 % CPU utilization it should be well above 1000 sessions but it might depend on router model.
Check with TAC for exact value for the model youa are using.
04-12-2018 07:30 AM
Additional question...
Reading the docs ... MTP is part of CUBE.
On ISR4000 series do I need to have CUBE session license (L-FL-CUBEE-100= or similar) to be entitled to use MTP in IOS (i.e. not using the PVDM4)?
Thanks for clarifying.
Regards
Fred
04-12-2018 07:40 AM
No, that's wrong,
MTP is NOT a part of CUBE.
MTP only needs the voice/UC license.
04-12-2018 08:11 AM
Thanks for the reply.
I was mislead by: https://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-border-element/data-sheet-c78-729692.html
See table 2 / search for "MTP".
Regards
Fred
04-12-2018 08:23 AM
Hi
The number of Software MTP session will be equivalent to 50% of the CPU usage. To get an official confirmation please open up a case with Cisco PDI or TAC
Thanks
03-16-2020 06:04 PM
For anyone still searching for the answer to this. Here is a presentation from 2017 cisco live that breaks down the supported SW MTP for the ISR4Ks
See page 49 or just search for MTP in the deck.
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2017/pdf/PSOCOL-2003.pdf
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide