cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1602
Views
0
Helpful
2
Replies

Maximum sip calls supported by CUBE 3945E

karlareyes
Beginner
Beginner

 

Hi All,

According to the link below the router 3945E supported maximum sessions is 2500.

http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-border-element/order_guide_c07_462222.html 

 

My question is what is the command to see the active sessions on the CUBE, I use show sip-ua calls summary but I'm not sure if it is the same count for the CUBE sessions.

 

Kind regards!

1 Accepted Solution

Accepted Solutions

Suresh Subramanian
Rising star
Rising star

Please refer this URL

https://supportforums.cisco.com/document/123281/how-check-active-call-count-sip

 

//Suresh

Please rate all the useful posts

//Suresh Please rate all the useful posts.

View solution in original post

2 Replies 2

Suresh Subramanian
Rising star
Rising star

Please refer this URL

https://supportforums.cisco.com/document/123281/how-check-active-call-count-sip

 

//Suresh

Please rate all the useful posts

//Suresh Please rate all the useful posts.

Thanks a lot Suresh!

So there is only an approximate of the sessions. No specific command available for the active sessions.

Regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: