cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
177
Views
0
Helpful
3
Replies
Highlighted
Beginner

meet me intermittent working in cme7.1

hi i have an weird problem.First i have created mee me conferencing and i was able to do meet me conferencing with 4 people. and after some time when i try to again. other than the conference initiator 2nd person cnnot join in meetme conference. I shut down the dspfarm and turned it back on but still same problem.i reloaded the router this time 3 people were able to join and again after soem time only the conference initiator can join 2nd person cannot join.please help me in this.I am thinking that there is a problem in 7.1.I am attaching the follwing configuration please go through this.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Re: meet me intermittent working in cme7.1

I've heard of something like this before.

Try replacing your sccp ccm version to 7.0 from 4.1.

sccp ccm ip x.x.x.x id 1 ver 7.0

You'll need to shut down sccp, remove the old binding, remove the current command, and then re-add it with the new version and put it back in the sccp ccm group.

This might work, as I think we're looking into some recent issues.

hth,

nick

View solution in original post

3 REPLIES 3
Highlighted
Contributor

Re: meet me intermittent working in cme7.1

Are you using a hardware or software conference bridge? If software, can you restart the "ip voice media streaming app" service and see if the conference works correctly again?

After everyone disconnects, do you have to recreate the meet-me conference with the meet-me softkey or can one person just join it by dialing the number?

Highlighted

Re: meet me intermittent working in cme7.1

I've heard of something like this before.

Try replacing your sccp ccm version to 7.0 from 4.1.

sccp ccm ip x.x.x.x id 1 ver 7.0

You'll need to shut down sccp, remove the old binding, remove the current command, and then re-add it with the new version and put it back in the sccp ccm group.

This might work, as I think we're looking into some recent issues.

hth,

nick

View solution in original post

Beginner

Re: meet me intermittent working in cme7.1

i am sorry that was some dialing issue. provided training to the customer on meet me

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here