cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
271
Views
0
Helpful
1
Replies
Highlighted
Contributor

Meet me problems - i get busy tone

Hi, i have a problem with a closter of 4 CM 4.1 3 , when i try to start a meet me conference i receive busy tone (this only hapens when i?m register on one of the 4 CM)

1 REPLY
Contributor

Re: Meet me problems - i get busy tone

If the Meet-me Conference fails with a reorder tone, perform these steps:

If this procedure is followed to initiate a Meet-me Conference, or someone joins a Meet-me Conference by dialing the Meet-me Conference number and the call fails with a reorder tone, check if the Meet-me directory number belongs to any partition.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008009476a.shtml

If the Meet-me directory number belongs to a partition, verify that the IP phone's calling search space (the IP phone that initiates or joins the Meet-me Conference) includes the partition where the Meet-me directory number is assigned.

CreatePlease to create content
Ask the Expert- Webex Hybrid Services Solutions