cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1468
Views
0
Helpful
5
Replies

Meetme Conference with Authentication

ievalleyccie
Level 1
Level 1

I have CUCME8.6 .

Is it possible to configure Meetme conference with authentication such as password or Pin ?

1 Accepted Solution

Accepted Solutions

Yes, you will need to develop a custom script for this case.

Regards

_____________________________
MDGDP, CCNA, CCNA Voice certified

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie

View solution in original post

5 Replies 5

Hi,

it is not posible MeetMe conference with authentication. it's a workaround using Unity Connection to create a way to accept/decline a participant to a conference but not using a PIN.

If you want a PIN authentication you will need Cisco Meetingplace.

Regards

_____________________________
MDGDP, CCNA, CCNA Voice certified

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie

Can I do that by CUE because I am using CUCME ?

Yes, you will need to develop a custom script for this case.

Regards

_____________________________
MDGDP, CCNA, CCNA Voice certified

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie

Checkout  MARS MeetMe Password in the link below for the below features

http://www.parsec-tech.com/portfolio.html

MARS Meet-Me Password application adds the following capabilities 
1. Remotely start the MeetMe conference
2. Authentication/Password for MeetMe Conference
3. Meeting Host Required/Not Required 
4. Start the MeetMe Conference from Jabber Client
5. Start the MeetMe Conference from iOS Based Phone , Android Based Phone
 
THERE IS NO NEED TO UCCE/UCCX/UNITY for this application

Manish Gogna
Cisco Employee
Cisco Employee

Its an old post but wanted to update it with the following Cisco doc for your requirement

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118722-configure-cucm-00.html

HTH

Manish