cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
1658
Views
0
Helpful
3
Replies
ray.maslanka
Contributor

Method to show CPTONE configurations on VG224

Does anyone have a way to show all the frequencies, durations, cadences, etc. that are defined by the default cptone country selections? 

Some values can be found via "show voice port 2/X", but I'm looking to confirm the actual frequencies used, cadences, etc.  Something like a "show cptone GB detail" command.

1 ACCEPTED SOLUTION

Accepted Solutions
Jorge Armijo
Enthusiast

Maybe this will work:

test voice tone

http://www.cisco.com/en/US/docs/ios/12_3t/voice/command/reference/vrht_t1_ps5207_TSD_Products_Command_Reference_Chapter.html#wp1645172

HTH

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.

View solution in original post

3 REPLIES 3
Jorge Armijo
Enthusiast

Maybe this will work:

test voice tone

http://www.cisco.com/en/US/docs/ios/12_3t/voice/command/reference/vrht_t1_ps5207_TSD_Products_Command_Reference_Chapter.html#wp1645172

HTH

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.

View solution in original post

Thank you, Jorge. That is exactly what I was looking for.

Hi Ray,

I'm glad I could help.

Thanks for the rating and good luck

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.
Content for Community-Ad

Spotlight Awards 2021