10-25-2008 06:21 AM - edited 03-15-2019 02:10 PM
Hi Folks,
I am used to configuring PRI (T1)in North America. What do I need to watch out for When Configuring a E1 (multiple ones) on 3845 MGCP? This is a Configuration for Eurpe?
What should I watch out for regarding Dial Peers ?
I will have 2 E1 in one router?
Thank you.
Raj
10-25-2008 08:12 AM
the main difference is just the channels, since this is not H323 you're not going to define the dial-peers which would need port x/x/:15 but other than that they will be the same. also the basic config of the controller regarding the framing, etc but the telco usually tells you the values you need to set to match their end. also the isdn-switchtype will be provided by the telco depending on what they have, a quick call to the telco will give you all the info regarding what you need to set on your end to work with their equipment
HTH
java
if this helps, please rate
11-06-2008 02:05 PM
Thanks you.
Raj
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide