cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4266
Views
0
Helpful
5
Replies

MGCP gateway doesn't register to Primary (subscriber) Callmanager

Hi,

I have an environment with two CallManagers in a cluster (Publisher 192.168.96.10 and Subscriber 192.168.96.11) and a 2851 as MGCP gateway. All the devices using as primary CallManager the Subscriber and registered to it. The MGCP gateway can't register to the Primary CallManager which is the Subscriber and only registers to the Backup which is the Publisher.

CENTRAL-VG#sh ccm-manager

MGCP Domain Name: CENTRAL-VG

Priority        Status                   Host

============================================================

Primary         Down                     192.168.96.11

First Backup    Registered               192.168.96.10

Second Backup   None

This has as a result, that in case the Publisher goes down, all the internal calls are working properly, but all the outgoing and incoming calls are not working.

Thanks in advance.

Agelos

5 Replies 5

Chris Deren
Hall of Fame
Hall of Fame

Can you post full config?

Also, does the device pool assigned to the GW in CUCM have proper CUCM group assigned?

Have you tried no mgcp/mgcp and reboot of the GW?

Chris