we have cucm 8 with MCS server , we have 600 DLUs.
we want to move to a new BE6k Server version 11 (we will do fresh installation).
the question is : can i move those DLUs to the new BE6K ? if possible how many enhance license will we get from those 600 DLUs.
Thanks in Advance
Solved! Go to Solution.
You may contact firstname.lastname@example.org as they will be able to assist with license migration process. You should use PCD for this migration as detailed here if running 8.6 version of cucm on MCS
I just Prepare the BOQ in Cisco QPT (Quick Pricing Tool), it only asks for the current profiles (phones) not the DLUs and it convert each profile to an enhance license ?
what i know is that each 6 DLUs = 1 enhance license . did Cisco changed it ?
License migration process from 8.x to 10.x / 11.x is covered here
thanks manish and Rajan,
thanks for the link to detailed documents .
but the question still remain , is it 600/6 =100 enhance or it is what the QPT (Quick Pricing Tool) is gving me (number of existing phones = number of enhance license i will get)
example in the QPT
current profiles in 8.6 = 180 phones
New Profiles in 11 = 180 Enhance Licenses
thank you very much manish.
it is very clear now .
i guess the used phones are consuming 4 DlUs not 6
6 DLUs = 1 Enhance only in the case that those DLUs are not attached with any phones
You will get 600/6=100 enhanced licenses while migrating as 6 DLUs constitute one enhanced license as mentioned in the below doc.
As Manish stated, contact Licensing team with the PAK id of your existing licenses or a license report, UUID from cucm 11 PLM to convert the DLUs to enhanced license.