09-06-2012 05:19 PM - edited 03-16-2019 01:04 PM
Hi all
My customer purchase a new solution of CUCM's in version 8, is possible use the database from the actual CCM 6 and only upload the backup from the old platform version 6 to the new uin version 8.6?
Thanks.
09-06-2012 05:22 PM
No, DRS needs the exact same version from which it was taken for it to work.
Your options are regular BAT or the export option and then massage the data as necessary so it's accepted into 8.X
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
09-06-2012 05:35 PM
Thanks for you help
So all the configuration as, device pool, transcoders, partitions, etc etc etc must need configured manually?
09-06-2012 05:36 PM
Correct, what you cannot export, will need to be configured manually on 8.X
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
09-06-2012 11:59 PM
Hello,
There is something called bridge upgrade, i think i remember.
You upgrade 6 to 8 in actual servers, and when it boots, you can not have call manager services running but will be able to do a backup. Then you revert from 8 to 6 and use the backup to restore in the new servers.
You can restore a backup from one cluster to other, but has to be the same version, ips, and may be security password.
Take a look at upgrade documentation and look for the keywords "bridge upgrade".
Hope this helps
Sent from Cisco Technical Support Android App
09-07-2012 08:24 AM
Thanks a lot i'm going to try
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide