01-28-2014 01:35 PM - edited 03-16-2019 09:29 PM
Hi
I have an issue with follow equipments:
1.- CUCM 7.1.5 (Publisher and Suscriber)
2.- 7975 SCCP75.9-3-1SR2-1S
3.- 7965 SCCP45.9-3-1SR2-1s
I installed the locale file to change the language of IP Phone to Spanish , the file that i used is cm-locale-es-CO-7.1.5.1200-1.cop (Spanish Colombia). The cop was installed succesful first in Publisher and then in Suscriber. Verifying the installation of language in IP Phones, I note that the only phone bottom that not change of language is "Back" in the route for example Directory-->Missing Calls.
I attached a picture of behaviour.
Somebody Knows if is possible to change the language of bottom "BACK" to spanish.
Regards
Solved! Go to Solution.
02-20-2014 09:26 AM
Jacobo
i have a same problem, and i load the firmware SCCP45.9-0-2SR1S, and the problem was fix.
01-29-2014 05:49 AM
Hi Jacobo,
I would open a TAC case as I believe this is related to the phone
firmware on these devices. Here is a similar bug (in reverse );
BACK' is not displayed in English when locale switched to English.
Symptom:
The 'BACK' is not displayed in English - instead it is still displayed in the foreign locale.
Rest of the words get changed to English.
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic
02-20-2014 09:26 AM
Jacobo
i have a same problem, and i load the firmware SCCP45.9-0-2SR1S, and the problem was fix.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: