cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2886
Views
10
Helpful
32
Replies

Mobile voice Access working but can't make outside calls

aysar3000
Level 1
Level 1

Dears

i configure mobile voice access and i can hear the IVR when i call from a PSTN Line and i input my Remote destination number then it ask me for my PIN and i put it then it ask to press one for a call and after that i dialed the number but it give busy tone

 

here is my configuration

my MVA number is 7999

my IOS COnfiguration

voice class codec 1
 codec preference 1 g711alaw
 codec preference 2 g711ulaw
 codec preference 3 g729r8
 codec preference 4 g729br8

voice translation-rule 3
 rule 1 /^9\(\)/ /\1/
!
voice translation-rule 4
 rule 4 /^22217/ /7/
 rule 5 /^2217/ /7/
 rule 6 /^022217/ /7/
 rule 7 /^0122217/ /7/
!
voice translation-rule 5
 rule 1 /^5/ /905/
 rule 2 /^1/ /901/
 rule 3 /^2/ /902/
 rule 4 /^3/ /903/
 rule 5 /^4/ /904/
 rule 6 /^6/ /906/
 rule 7 /^7/ /907/
 rule 8 /^8/ /908/
 rule 10 /^00/ /900/
 rule 11 /'+'/ /900/
!
voice translation-rule 9
 rule 1 /^5/ /05/
!
!
voice translation-profile MVA
 translate calling 9
!
voice translation-profile OUT
 translate called 3
!
voice translation-profile REDIAL
 translate calling 5
!
voice translation-profile SIP-NEW
 translate called 4

dial-peer voice 802 voip
 description ** SIP TO STC **
 translation-profile outgoing OUT
 destination-pattern 9T
 session protocol sipv2
 session target ipv4:10.208.9.69:5060
 session transport udp
 voice-class codec 1
 voice-class sip dtmf-relay force rtp-nte
 voice-class sip profiles 1
 dtmf-relay sip-notify rtp-nte sip-kpml
 fax rate disable
 no vad

dial-peer voice 802 voip
 description ** SIP TO STC **
 translation-profile outgoing OUT
 destination-pattern 9T
 session protocol sipv2
 session target ipv4:10.208.9.69:5060
 session transport udp
 voice-class codec 1
 voice-class sip dtmf-relay force rtp-nte
 voice-class sip profiles 1
 dtmf-relay sip-notify rtp-nte sip-kpml
 fax rate disable
 no vad

dial-peer voice 811 voip
 description ** SIP INCOMING FROM STC **
 translation-profile incoming SIP-NEW
 translation-profile outgoing REDIAL
 destination-pattern 7...
 session protocol sipv2
 session target ipv4:192.168.200.53
 incoming called-number 022217...$
 voice-class codec 1
 dtmf-relay sip-notify rtp-nte sip-kpml
 fax rate disable
 no vad
!
dial-peer voice 812 voip
 description ** SIP INCOMING FROM STC **
 translation-profile incoming SIP-NEW
 translation-profile outgoing REDIAL
 destination-pattern 7...
 session protocol sipv2
 session target ipv4:192.168.200.53
 incoming called-number 22217...$
 dtmf-relay sip-notify rtp-nte sip-kpml
 codec g711alaw

dial-peer voice 7999 voip

Description "MVA"
 translation-profile incoming SIP-NEW
 service mva
 session protocol sipv2
 incoming called-number 2217999
 voice-class codec 1
 dtmf-relay rtp-nte
 no vad
!
dial-peer voice 7991 voip
 translation-profile incoming SIP-NEW
 translation-profile outgoing OUT
 destination-pattern 7999
 session protocol sipv2
 session target ipv4:192.168.200.53
 voice-class codec 1
 dtmf-relay rtp-nte
 fax rate disable
 no vad

 

in the service parameter

 

 False  
 
 Complete Match  

10  

 

 

 

Thanks in Advanced

32 Replies 32

Hi.

Did you check that CSS of associated DN on Destination Profile an redirect CSS allows you to call out?

 

Let us know.

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"

dears yes my css is international and rerouting also an international

 

Regards

Yes it allow to reroute call to interntional, mobile, local & national

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: