11-15-2012 12:11 PM - edited 03-16-2019 02:13 PM
Hello,
CUCM 8.x with remote sites and 2800 series routers at each site. Phones register centrally. Is there anyway to get MOH from an audio source that is local to the remote site instead of coming across the WAN? Bandwidth is at a premium.
Thanks, Replies rated.
11-15-2012 12:25 PM
Here is the article I followed to get it working. Hope this helps.
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00802d1c31.html
11-15-2012 01:38 PM
Thanks, I forgot to mention that multicast is not an option at the remote site. Ony Unicast
11-15-2012 05:17 PM
You do not need to enable multicast for this to work as long as the phones at the remote site are on the same VLAN as the gateway, essentially what you are doing is faking the phones to think they are connecting to multicast IP address of CUCM server where in fact the multicast traffic is local to the remote site. No multicast routing needs to be enabled if all phones are in the same multicast domain (vlan) as the GW.
HTH,
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide