10-09-2016 05:38 AM - edited 03-17-2019 08:18 AM
hi all
do any one have idea , how to remove the Quotation from moh "flash0:/music-on-hold.au". actually I am practicing on router 2911 without voice card , and the router is working nice and I configured also the ip phones 7941, 7942, 6921 . but I couldn't solve the issue of the MOH.
the ios on the router are c2900-universalk9-mz.SPA.152-4.M3.bin. I can arrange to get VIC2 4FOX , but could this solve the issue of moh.
Thanks in Advance
Nasir Aziz
10-10-2016 03:30 AM
10-09-2016 08:42 AM
call-manager-fallback
telephony-service
no moh
no multicast moh
moh enable-g711 "flash0:/music-on-hold.au"
create cnf
Enable Multicast only when you have multicast configured in your network.
10-09-2016 09:37 PM
Salam Mohammad
I try to apply call-manager-fallback but it ask me to remove tele-serv
and when I remove the tele-serv not work .
I am erasing the configuration again and start from 0 and feedback to you
10-09-2016 11:35 PM
moh enable-g711 "flash0:/music-on-hold.au"
not accepting
10-09-2016 06:13 AM
Do you have multicast in your environment? if not remove below command
multicast moh 239.1.1.1 port 16384 route 192.168.200.254
Can you provide below outputs
- show tech voice
- show flash
What's user experience when put on hold?
Does hold works between phones?
10-09-2016 06:16 AM
there is no output for tech voice
the hold working but normal beep , not music ,
10-09-2016 06:18 AM
ping me
show runn
show flash
show telephony-ser
10-09-2016 06:47 AM
I can ping all ip phones and in voice vlan
CME#ping 192.168.200.7
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.200.7, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
CME#ping 192.168.100.253
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.100.253, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
CME#ping 192.168.200.254
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.200.254, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
CME#ping 192.168.200.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.200.1, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
CME#ping 192.168.200.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.200.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
CME#ping 192.168.200.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.200.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
CME#ping 192.168.200.4
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.200.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
10-09-2016 11:34 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide