cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
410
Views
5
Helpful
4
Replies
Highlighted

Multiparty Conference in CME

Hi,

I have configured for multiparty ad-hoc conference in cme 7.0(0), but i m having an error message while trying to conference " Cannot Complete Conference "

the dsp resources are properly allocated.

#show dspfarm all

Dspfarm Profile Configuration

Profile ID = 1, Service = CONFERENCING, Resource ID = 1

Profile Description :

Profile Service Mode : Non Secure

Profile Admin State : UP

Profile Operation State : ACTIVE

Application : SCCP Status : ASSOCIATED

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 4

Number of Resource Available : 4

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required

SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0 2 23.6.2 UP N/A FREE conf 1 - - -

0 2 23.6.2 UP N/A FREE conf 1 - - -

0 3 23.6.2 UP N/A FREE conf 1 - - -

0 3 23.6.2 UP N/A FREE conf 1 - - -

Total number of DSPFARM DSP channel(s) 4

Please help me..

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Master

Re: Multiparty Conference in CME

Please post your configuration. Did you configure the conference ephone-dns? I've seen that to be a common issue.

Chris

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Master

Re: Multiparty Conference in CME

Please post your configuration. Did you configure the conference ephone-dns? I've seen that to be a common issue.

Chris

View solution in original post

Highlighted

Re: Multiparty Conference in CME

Thanks for your valuable reply.....

i configured coneference dns and its working perfectly now...

configured as

ephone-dn XX dual-line

number A000

conference ad-hoc

end

ephone-dn XX1 dual-line

number A000

conference ad-hoc

preference 1

end

ephone-dn XX2 dual-line

number A000

conference ad-hoc

preference 2

end

ephone-dn XX3 dual-line

number A000

conference ad-hoc

preference 3

end

thanks alot...

Highlighted
Hall of Fame Master

Re: Multiparty Conference in CME

Glad it worked for you, please remember to rate helpful posts!

Chris

Beginner

Re: Multiparty Conference in CME

hi howz ur issue fixed i am also having same problem please help me in this

CreatePlease to create content