Hi all,
I have one CME (with SCCP ephones) configured to make outbound calls using a SIP line provided by and external SIP proxy, I just configured 4 credentials in sip-ua, so I can receive calls from 4 diferents numbers. But when I try to make outbound calls I only can make one call, because I configured just one authentication username) in the sip-ua configuration.
Is there any way to configure more users to use more than one line for outbound calls?
My actual configuration is something like this:
sip-ua
credentials username xxxx7 password 7 xxxxxxxxxxxxxxxx realm myISP.com
credentials username xxxx8 password 7 xxxxxxxxxxxxxxxx realm myISP.com
credentials username xxxx9 password 7 xxxxxxxxxxxxxxxx realm myISP.com
credentials username xxxx0 password 7 xxxxxxxxxxxxxxxx realm myISP.com
authentication username xxxx7 password 7 xxxxxxxxxxxxxxxx realm myISP.com
Is there a way to make more than one call using diferents users and passwords?
I heard something about using dial-peer pots, but all I can see is about Fxs ports or VG244 series, and I´m using only 7940 phones
Thanks in advance
