cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
748
Views
5
Helpful
5
Replies

Muting Callers to a Meet-Me Conference

BethanyTerry
Beginner
Beginner

Does anyone know how the conference controller can mute the callers that call in for a Meet-Me conference call? Apparently, we recently had a major Meet-Me call with assorted dept heads and state agencies calling in, and not everyone was kind enough to mute the phone on their end, so the controller has asked me if there's any way to mute callers so that the only person speaking is the controller himself. Any thoughts would be appreciated. (I have CUCM 10.5 and use 7965G phones). -Beth

2 Accepted Solutions

Accepted Solutions

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

You can't

HTH

java

if this helps, please rate

View solution in original post

Wilson Samuel
Rising star
Rising star

Hi Bethany,

I checked the SRND as well as the Service Parameters in the CCM and I could not locate anywhere where it describes any way to define that.

More over, Cisco explicitly mentions Meet Me as an Rendezvous Meeting and is mostly basic configuration. For features like PIN, Mute etc I am afraid you may want to go the route of WebEx (in cloud or on premises) which is part of the CUWL Pro.

http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-licensing/product_solution_overview0900aecd806cc7a4.html

Please get in touch with your local Cisco AM and you will be better served.

 

HTH

View solution in original post

5 Replies 5

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

You can't

HTH

java

if this helps, please rate

Thanks for your time Jaime. I suspected as much but had to ask the experts. -Beth

Hi.

Just to add a tip to what Jaime correctly mentioned, with cucm 11.x you can setup a conference number per user with access code feature. 

Being based on meetme, here is reported the mute restriction.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_0_1/featureConfig/CUCM_BK_FE5123E0_00_cucm-feature-configuration-guide_1101/conference_now.html#CUCM_RF_C2EE34B5_00

 

HTH

 

 

Cheers

 

Carlo

Please rate all helpful posts "The more you help the more you learn"

Wilson Samuel
Rising star
Rising star

Hi Bethany,

I checked the SRND as well as the Service Parameters in the CCM and I could not locate anywhere where it describes any way to define that.

More over, Cisco explicitly mentions Meet Me as an Rendezvous Meeting and is mostly basic configuration. For features like PIN, Mute etc I am afraid you may want to go the route of WebEx (in cloud or on premises) which is part of the CUWL Pro.

http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-licensing/product_solution_overview0900aecd806cc7a4.html

Please get in touch with your local Cisco AM and you will be better served.

 

HTH

Thanks for your time. I suspected as much but had to ask the experts. -Beth

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers