MWI for Analog phones

[happyatuni]

Dear NetPro gurus,

My client just installed a brand new CME with CUE on a Cisco 3945 ISR G2 router.  However, they have over 30 Analogue phones which are connected to 2 x Cisco VG224, which in turn is registered with CME.

They have the following enquiries:-

Q1.     Can analogue phones get MWI?  Is there a particular brand / model of analogue phones that supports MWI?

Q2.     If so, does MWI for analogue phones works with Cisco CME and CUE?

Thanks so much and would greatly appreciated if anyone can shed some light on this.

Cheers,

Hunt

[Nizar Abuseni]

Hello Hunt,

Here is a similar post for what you are looking:

https://supportforums.cisco.com/message/1093532#1093532

Also there is a good link for the MWI with third party phones:

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/vg248/1_3_1/english/configuration/guide/vg248swv.html

https://supportforums.cisco.com/docs/DOC-3301

I hope that helps you.

Best regards,

Nizar