10-29-2011 06:39 AM - edited 03-16-2019 07:46 AM
cius and 9951 auto register to my cucm8.6 ,from the CUCM's perspective, it says Status: Rejected.I know why.
My sccp phone is ok.
Solved! Go to Solution.
10-29-2011 08:18 AM
Zhou,
Check your Enterprise Parameter for auto-registration, by default its SCCP:
Keep in mind after changing this setting you need to restart CCM and TFTP most likely.
Hope this helps!
-Brett Fritzsch
10-29-2011 08:18 AM
Zhou,
Check your Enterprise Parameter for auto-registration, by default its SCCP:
Keep in mind after changing this setting you need to restart CCM and TFTP most likely.
Hope this helps!
-Brett Fritzsch
10-31-2011 05:35 AM
HI Breet,
it is ok.thank you.
12-17-2011 10:44 PM
Hi, all!
I have the same problem. My sip phones is rejected by cucm 8.6. Changing Enterprise parameter SCCP to SIP does not help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide