cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
312
Views
0
Helpful
2
Replies

Need Basic Dial Plan Help

Hi,

 

I have a fairly (basic) dial plan question.  I need all inbound calls from the PSTN to go directly to our Unity Express Auto Attendant number which is currently extension 502.  I thought I had set this up correctly in CME (8.6) but I keep getting a message that the number cannot be reached.  Any help is appreciated as I may have missed something. Here is the abbreviated Config:

Current configuration : 12212 bytes
!
! Last configuration change at 14:11:35 PST Tue Aug 26 2014 by routeradmin
! NVRAM config last updated at 14:11:37 PST Tue Aug 26 2014 by routeradmin
! NVRAM config last updated at 14:11:37 PST Tue Aug 26 2014 by routeradmin
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname voicerouter
!
boot-start-marker
boot-end-marker
!
!
card type t1 0 0
enable secret 4 t3Ic8qb5ewMDWvTa4L9l1WMKprop/NnpCj9WtdkqGGc
!
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec login local
aaa authorization network login local
!
!
!
!
!
aaa session-id common
!
clock timezone PST -8 0
clock summer-time PST recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
!
no ipv6 cef
ip source-route
ip cef
!
!
!
ip dhcp excluded-address 192.168.8.1 192.168.8.19
!
ip dhcp pool owhvoip
 network 192.168.8.0 255.255.248.0
 default-router 192.168.8.1
 option 150 ip 192.168.8.1
 lease 30
!
!
!
multilink bundle-name authenticated
!
!
!
!
isdn switch-type primary-ni
!
crypto pki token default removal timeout 0
!
!
voice-card 0
 dspfarm
 dsp services dspfarm
!
!
!
voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
!
voice class custom-cptone jointone
 dualtone conference
  frequency 600 900
  cadence 300 150 300 100 300 50
!
!
!
!
voice translation-rule 1
 rule 1 /9400/ /502/
!
voice translation-rule 2
 rule 1 /.*/ /5415489400/
!
!
voice translation-profile Inbound_Calls_To_CUE
 translate called 1
!
voice translation-profile Local-CLID
 translate calling 2
!
!
license udi pid CISCO2911/K9 sn FTX1641AHX3
hw-module pvdm 0/0
!
hw-module sm 1
!
!
!
username routeradmin password 7 091649040910450B41
username cmeadmin privilege 15 password 7 03104803040E375F5E4D5D51
!
redundancy
!
!
!
!
controller T1 0/0/0
 cablelength long 0db
 pri-group timeslots 1-10,24
!
zone security trusted
zone security internet
zone-pair security trusted-to-internet source trusted destination internet
zone-pair security untrusted-to-trusted source internet destination trusted
!
!
!
!
!
!
!
interface Loopback0
 ip address 192.168.17.1 255.255.248.0
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 description Internet
 ip address dhcp
 no ip redirects
 no ip proxy-arp
 shutdown
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 ip address 192.168.8.1 255.255.248.0
 duplex auto
 speed auto
!
interface GigabitEthernet0/2
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0/0:23
 no ip address
 encapsulation hdlc
 isdn switch-type primary-ni
 isdn incoming-voice voice
 no cdp enable
!
interface Integrated-Service-Engine1/0
 ip unnumbered Loopback0
 service-module ip address 192.168.17.2 255.255.248.0
 !Application: CUE Running on NME
 service-module ip default-gateway 192.168.17.1
 no keepalive
!
ip forward-protocol nd
!
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/cme-gui-8.6.0
!
ip route 192.168.17.2 255.255.255.255 Integrated-Service-Engine1/0
!
!
!
!
!
!
tftp-server flash:apps31.9-3-1ES26.sbn
tftp-server flash:term31.default.loads
tftp-server flash:SCCP31.9-3-1SR4-1S.loads
tftp-server flash:jar31sccp.9-3-1ES26.sbn
tftp-server flash:dsp31.9-3-1ES26.sbn
tftp-server flash:cvm31sccp.9-3-1ES26.sbn
tftp-server flash:cnu31.9-3-1ES26.sbn
!
!
!
control-plane
!
!
voice-port 0/0/0:23
!
!
!
mgcp profile default
!
sccp local GigabitEthernet0/1
sccp ccm 192.168.8.1 identifier 1 version 4.0
sccp
!
sccp ccm group 15
 associate ccm 1 priority 1
 associate profile 1 register CFBOWH
 keepalive retries 5
!
dial-peer voice 500 voip
 destination-pattern 5..
 session protocol sipv2
 session target ipv4:192.168.17.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 10 pots
 translation-profile incoming Inbound_Calls_To_CUE
!
dial-peer voice 20 pots
 translation-profile outgoing Local-CLID
 destination-pattern 9..........
 port 0/0/0:23
!
!
!
!
gatekeeper
 shutdown
!
!
telephony-service
 protocol mode ipv4
 conference hardware
 moh-file-buffer 90
 no auto-reg-ephone
 authentication credential cmeadmin tshbavsp$$4
 max-ephones 50
 max-dn 200
 ip source-address 192.168.8.1 port 2000
 service dnis dir-lookup
 timeouts transfer-recall 30
 system message Oregon's Wild Harvest
 url services http://192.168.17.2/voiceview/common/login.do
 url authentication http://192.168.8.1/CCMCIP/authenticate.asp
 cnf-file location flash:
 load 7931 SCCP31.9-3-1SR4-1S.loads
 time-zone 5
 time-format 24
 voicemail 500
 max-conferences 8 gain -6
 call-park system application
 call-forward pattern .T
 moh flash:/moh.wav
 web admin system name cmeadmin secret 5 $1$60ro$u.0r/cno/OD2JmtvPq4w9.
 dn-webedit
 transfer-digit-collect orig-call
 transfer-system full-consult
 transfer-pattern .T
 fac standard
 create cnf-files version-stamp 7960 Aug 26 2014 12:49:29
 

 

1 Accepted Solution

Accepted Solutions

acampbell
VIP Alumni
VIP Alumni

Hi,

Can you try adding this to your dial peer 10 pots

!
dial-peer voice 10 pots
desc *** MATCH INCOMING CALLS ***
translation-profile incoming Inbound_Calls_To_CUE
incoming called-number .
port 0/0/0:23
!

Then retest

Regards
Alex

Regards, Alex. Please rate useful posts.

View solution in original post

2 Replies 2

acampbell
VIP Alumni
VIP Alumni

Hi,

Can you try adding this to your dial peer 10 pots

!
dial-peer voice 10 pots
desc *** MATCH INCOMING CALLS ***
translation-profile incoming Inbound_Calls_To_CUE
incoming called-number .
port 0/0/0:23
!

Then retest

Regards
Alex

Regards, Alex. Please rate useful posts.

Alex,

 

Thank you very much that worked perfect!!!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: