ā10-19-2011 09:46 AM - edited ā03-16-2019 07:36 AM
Hi,
I have configured FXS in 1/0/3 slot in 3825 gateway which has registered to our call manager.But when I connected the FAX Machine to this port,its not working.Can anybody let me know,anything i am missing in configuration side.I am not sure where i need to check.
ā10-21-2011 01:21 PM
Silly question but have you checked to see if you have dial tone on this port?
If so when you say it is not working do you mean incoming and outgoing?
Also posting the config of the gateway may help to know what you are looking at.
ā10-21-2011 09:10 PM
Hi,
Sorry FXS port is 0/1/3 not 1/0/3.After doing the configuration in call manager we have connected the analog phone but there is no dial tone.Configuration of gateway is below:
============================================================
ccm-manager fallback-mgcp
ccm-manager redundant-host 10.129.4.50 10.129.4.52
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.129.4.52
ccm-manager config
!
mgcp
mgcp call-agent 10.129.4.51 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
no mgcp fax t38 ecm
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
!
mgcp profile default
!
sccp local GigabitEthernet0/0
sccp ccm 10.129.4.51 identifier 51 priority 1 version 5.0.1
sccp ccm 10.129.4.50 identifier 50 priority 2 version 5.0.1
sccp ccm 10.129.4.52 identifier 52 priority 3 version 5.0.1
sccp ip precedence 3
sccp
!
sccp ccm group 3
bind interface GigabitEthernet0/0
associate ccm 51 priority 1
associate ccm 50 priority 2
associate ccm 52 priority 3
associate profile 20 register XCO00235EFE8EA0
associate profile 10 register CFB00235EFE8EA0
registration retries 15
registration timeout 8
keepalive retries 7
keepalive timeout 50
connect retries 5
connect interval 1200
!
dspfarm profile 20 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
associate application SCCP
shutdown
!
dspfarm profile 10 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
associate application SCCP
shutdown
!
!
dial-peer voice 10 pots
translation-profile incoming 40
incoming called-number .
direct-inward-dial
!
dial-peer voice 20 pots
destination-pattern 0.T
port 0/0/0:15
!
dial-peer voice 100 pots
service mgcpapp
port 0/0/0:15
!
dial-peer voice 200 voip
translation-profile outgoing 20
destination-pattern ^[23]...$
session target ipv4:10.129.57.181
!
dial-peer voice 800 voip
description "SRST Auto Attendant"
translation-profile outgoing 80
destination-pattern 2138566888
session protocol sipv2
session target ipv4:10.129.57.183
codec g711ulaw
no vad
!
dial-peer voice 801 voip
description "CUE Voice Mail"
translation-profile outgoing 30
destination-pattern 888621709
session protocol sipv2
session target ipv4:10.129.57.183
dtmf-relay sip-notify
codec g711ulaw
no vad
!
dial-peer voice 802 voip
description "CUE Auto Attendant"
destination-pattern 888621710
session protocol sipv2
session target ipv4:10.129.57.183
dtmf-relay sip-notify sip-kpml
codec g711ulaw
no vad
!
dial-peer voice 30 pots
destination-pattern 3...
port 0/0/1:15
forward-digits 4
!
dial-peer voice 999010 pots
service mgcpapp
port 0/1/0
!
dial-peer voice 999011 pots
service mgcpapp
port 0/1/1
!
dial-peer voice 40 pots
destination-pattern 2138566922
port 0/1/1
!
dial-peer voice 50 pots
destination-pattern 2138566923
port 0/1/0
!
dial-peer voice 999012 pots
service mgcpapp
port 0/1/2
!
dial-peer voice 999013 pots
service mgcpapp
port 0/1/3
=======================================================
ā10-23-2011 03:33 AM
Hi,
I think below command is missing in this gateway configuration,
1) mgcp modem passthrough voip mode nse
2) ccm-manager fax protocol cisco
3) mgcp fax t38 ecm
4) no mgcp fax t38 inhibit
5) service mgcpapp out-bound (For dial-peer)
Please let me know.
ā10-24-2011 10:12 AM
Does the end point in slot 0/1/3 for this gateway show registered in CUCM?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide