network-clock-participate on wic card

[gevangelista]

I need to  remove the following configuration.

network-clock-participate wic 0

But when I' put the command

no network-clock-participate wic 0

the router display me  the following output

this command cannot be unconfigured for this interface

It's possible to remove the line command?

[Chris Deren]

Why do you need to remove it?

Do you have any T1/E1 voice circuits in any wic slots? If so, you cannot remove this without removing the T1/E1 first as this is a prerequisite for those.

HTH,

Chris