11-30-2006 10:27 AM - edited 03-14-2019 07:01 PM
Hi,
I have a branch office connected to the central office using a PPP link. There is a CCM in the central site (3.3.4 sr2) and ip phones in the branch office.
Using additional DSP on the Gateway of the Remote Office (Cisco1760) I've configured the CFB in the CCM, and then the MRG & MRGL and applied to the Device Pool of that branch office. The CFB is registered to the CCM, and when I run sh dspfarm and sh sccp I see that it's up/active. But when the people of the branch office want to make a conference once the third party is added the call is dropped.
Any ideas?? I'm attaching the running config and a debug at the time of the conference attempt.
Thanks in advance for your help.
11-30-2006 12:26 PM
Orlando
Did you assign the MRGL to the phones in the remote office?
Larry
11-30-2006 02:09 PM
Yes...I assigned that MRGL to the Device pool of the branch office.
:( IDK what else could be the problem!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide