ā03-25-2013 05:11 AM - edited ā03-16-2019 04:25 PM
hi,
i tried configuration cisco router 2811 (ucme 7.1) with x-lite,configuration is :
int fa0/0
ip address 192.168.1.1 255.255.255.0
no shut-->exit
voice service voip
allow-connections sip to sip
sip
registrar server expires max 1200 min 300voice register global
mode cme
source-address 192.168.1.1 port 5060
max-dn 10
max-pool 5
authenticate register
tftp-path flash
create profilevoice register dn 1
number 51234
allow watch
name voip
label 51234voice register pool 1
id mac DEAD.BEEF.0001 ( id mac PC1)
number 1 dn 1
dtmf-relay sip-notify
username shendi password 12345
codec g711ulawroouter#conf t
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#voice register global
router(config-register-global)#create profile
router(config-register-global)#restartafter entering the command above appears notification : No contact info available for pool 1
why there notification?please explain to me,thanks
I set the ip on PC1 with ipv4:192.168.1.6 with subnet mask 255.255.255.0 and default-gateway 192.168.1.1
ā07-24-2015 04:39 AM
thank you for your help
ā02-15-2016 09:28 AM
Hi
Try this:
voice service voip
sip
no registrar server
!
voice register global
no tftp-path flash
no create profile
reset
tftp-path flash:
create profile
!
voice service voip
sip
registrar server
reset you phone and test again
Best regards!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: