cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
511
Views
0
Helpful
1
Replies

Noise reduction on Voice gateway

Dennis Mink
VIP Alumni
VIP Alumni

Does anyone have any experience with back ground noise configuration on IOS gateways? how to verify it and if it any good?

in the voice port configuration guide it claims:

Noise Reduction (NR) is a voice enhancement process that improves the quality of incoming speech that has already been corrupted with background noise; for example, a voice conference participant speaking on a cell-phone in a car. NR works best with steady state broadband noises like engine noise but not as well with impulsive noises like nearby chatter.

which sounds like a great feature to use.

Configuring the Media Class Globally for NR Perform this task to configure a media class globally

(as per http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/voiceport/configuration/15-mt/vp-15-mt-book.pdf  )

SUMMARY STEPS

1. enable

2. configure terminal

3. media service

4. enhancement

5. tdm tag

6. end

II was wondering if someone knows how to verify is this is kicking in on a call, and test if  noise reduction is functioning at all.

I have configured it on a MGCP gateway, running 15.2-4.M4  with PVDM3's, and trying to find out if it is kicking in on an inbound call from a mobile phone.

Please remember to rate useful posts, by clicking on the stars below.

1 Reply 1

Tagir Temirgaliyev
Spotlight
Spotlight

how to verify ?

participant speaking on a cell-phone in a car. NR works best with steady state broadband noises like engine noise

so you will not hear engine noise

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: