Nokia Call Connect and CUCME 7.1

[paveltoleon]

Good day!!!

Does anyone have working configuration of Nokia E71 with Nokia Call Connect 1.1 integrated to CCME 7.1?

As I've understood CUCME is supported with Nokia Call Connect 1.1 only.

Regards,

Pavel

[LBS-BZ-HI]

hi,

have you some news? is there something going on to support the E72 (i have E5 Phones with Nokia CC v2 - and CUCME7.0)
does it work with CUCME 8.x?

thanks!

[paveltoleon]

Please see my answer here:

https://supportforums.cisco.com/message/3221337

[Aaron Harrison]

Hi

That's what makes me think of theh line - a shot in the dark really; but since it otherwise works it may just be that the octo-line is giving it 8 lines to choose from, and it's picking the wrong one in some way...

Regards

[paveltoleon]

Aaron,

I've made it this way and tried:

ephone  19

device-security-mode none

mac-address AAAA.BBBB.CCCC

max-calls-per-button 3

busy-trigger-per-button 1

type nokia

button  1:19

ephone-dn  19 dual-line

number 1019

pickup-group 1

label Phone 19

name Phone 19

Same story, phones are ringing both ways, but once the call is picked up to sounds.

I make redial, but phones doesn't show incoming calls.

Don't you think debug will show anything?

Pavel