02-20-2009 07:21 AM - edited 03-15-2019 04:21 PM
Hi,
Has anyone got any good pdf for configuring Nokia phones to work in dual mode with wireless and call manager setup.
Thanks,
Derek
02-20-2009 10:57 AM
Hi,
You could check pdfs from Nokia for Business site: http://www.businesssoftware.nokia.com/nokia_intellisync_call_connect_for_cisco_downloads.php
-Pasi-
02-20-2009 08:48 PM
Is is possible to integrate with CallManager 4.x release?
02-21-2009 01:10 AM
Yes, with Nokia's Call Connect software.
-Pasi-
02-21-2009 03:39 AM
can we use it with cme 4.2...can my nokia E71 register with my cme router...plz reply...
02-21-2009 04:55 AM
Yes you can.
Nokia Call Connect software supports also CME and UC500.
-Pasi-
02-21-2009 04:59 AM
can you plz send the procedure how i can implement it...i will be very thankful to you...
02-22-2009 09:51 AM
I have installed the CallConnect Software from Nokia website. After install, although the Nokia device type appears in the "Add Phone" menu, but I could not find device load in TFTP folder?
Any suggestions
02-22-2009 11:18 PM
Hi,
Have you tried to register Nokia device to CUCM?
Is there any specific reason you want to see TFTP load?
-Pasi-
02-23-2009 02:41 AM
03-05-2009 01:47 AM
Hi,
I have E71 and installed Nokia ICC Cisco 60 day trial version on it.
I installed cmterm-nokia_s60_001-sccp.cop.sgn on our CUCM6.0.
I configured Acces Point, SCCP profile, Internet phone.. and all of that on the phone by Nokia Eseries Deployment Guide v.1.1.1
Problem is that i registerd phone on CUCM, he got an address, but I can't see the line on phone. Under Nokia CC Cisco there is (no profile active).
License error, or misconfiguration? Thanks in advanced!
03-05-2009 09:49 PM
Marijatopic,
Did you restart the phone after application installation. Also make sure to switch the phone to use the wireless (always), not the packet network.
Best of luck,
Khalid
03-05-2009 11:11 PM
Hi syed_khalid_khursheed,
I did, i reinstall the application also.
I also force connection Connecting "SCCP profile" via "My Acces Point".
Connection to CUCM is made, he is Registered with CUCM-BE, but he does not download its profile.
03-09-2009 04:11 AM
Hi,
Have you solved this issue already?
If not you could try to restart the CUCM
-pasi-
03-09-2009 04:17 AM
Hi pasimahone ,
i didn resolve this,
it's not lab environment,so i can't just restart it, maybe to restart some service.
But i got phone to register on CUCM- problem is that phone wont download profile from it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide