Nokia E71 phones working with CCM over wireless

[Derek McCormick]

Hi,

Has anyone got any good pdf for configuring Nokia phones to work in dual mode with wireless and call manager setup.

Thanks,

Derek

[pasimahone]

Hi,

You could check pdfs from Nokia for Business site: http://www.businesssoftware.nokia.com/nokia_intellisync_call_connect_for_cisco_downloads.php

-Pasi-

[syed_khalid_khursheed]

Is is possible to integrate with CallManager 4.x release?

[pasimahone]

Yes, with Nokia's Call Connect software.

-Pasi-

[tiger_401]

can we use it with cme 4.2...can my nokia E71 register with my cme router...plz reply...

[pasimahone]

Yes you can.

Nokia Call Connect software supports also CME and UC500.

-Pasi-

[tiger_401]

can you plz send the procedure how i can implement it...i will be very thankful to you...

[syed_khalid_khursheed]

I have installed the CallConnect Software from Nokia website. After install, although the Nokia device type appears in the "Add Phone" menu, but I could not find device load in TFTP folder?

Any suggestions

[pasimahone]

Hi,

Have you tried to register Nokia device to CUCM?

Is there any specific reason you want to see TFTP load?

-Pasi-

[stafford.slater]

Hi There,

You may find this document usefull, also make sure you indtall the following file

cmterm_nokia_s60_001_sccp.cop

This is version dependabt so make sure you down load the correct version.

[marijatopic]

Hi,

I have E71 and installed Nokia ICC Cisco 60 day trial version on it.

I installed cmterm-nokia_s60_001-sccp.cop.sgn on our CUCM6.0.

I configured Acces Point, SCCP profile, Internet phone.. and all of that on the phone by Nokia Eseries Deployment Guide v.1.1.1

Problem is that i registerd phone on CUCM, he got an address, but I can't see the line on phone. Under Nokia CC Cisco there is (no profile active).

License error, or misconfiguration? Thanks in advanced!

[syed_khalid_khursheed]

Marijatopic,

Did you restart the phone after application installation. Also make sure to switch the phone to use the wireless (always), not the packet network.

Best of luck,

Khalid

[marijatopic]

Hi syed_khalid_khursheed,

I did, i reinstall the application also.

I also force connection Connecting "SCCP profile" via "My Acces Point".

Connection to CUCM is made, he is Registered with CUCM-BE, but he does not download its profile.

[pasimahone]

Hi,

Have you solved this issue already?

If not you could try to restart the CUCM

-pasi-

[marijatopic]

Hi pasimahone ,

i didn resolve this,

it's not lab environment,so i can't just restart it, maybe to restart some service.

But i got phone to register on CUCM- problem is that phone wont download profile from it.