03-11-2014 03:17 PM - edited 03-16-2019 10:06 PM
Hi all,
I have 2951 router with "C2951-universalK9-mz-SPA.152-4.M3.bin" ios , my problem is that when I try to configure diap peers i am not seeing these command under "conf ter" , so any one have ide what is the probelem, please help me out for this issue.
I hope i will receive solution with details .
Thanks
Rizwan
03-11-2014 03:28 PM
Hi Rizwan,
If you run a "show version" command. Can you see the UC license installed on your router?
HTH
Please rate helpful answers
Gabriel
03-11-2014 03:32 PM
hi Gabriel,
Thanks for reply , yes I am seening these info
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO2951/K9 FTX1545A0QW
Technology Package License Information for Module:'c2951'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc None None None
data None None None
Configuration register is 0x2102
03-11-2014 05:56 PM
You don't have a UC license in order to configure voice related commands, you need to buy the license, install it, and then, you can configure DPs.
03-11-2014 08:20 PM
Hi Rizwan,
as rightly mentioned by Jaime, u do not have Unified communications /UC license [+5].
you can generate en evaluation license and try the commands.At same time , go for permanent license.
regds,
aman
03-12-2014 02:18 AM
Hi Rizwan,
To activate the 60-day evaluation license enter:
1. configure terminal
2. license accept end user agreement
you will find more details here:
http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html#wp1155517
03-12-2014 04:24 PM
thanks bro ,yes u r write , thanks for response I have solve this issue as per ur advice
03-12-2014 04:23 PM
thanks bro , yes u r write , thanks for response I have solve this issue as per ur advice
03-12-2014 04:19 PM
yes u r write , thanks for response I have solve this issue as per ur advice
03-12-2014 04:21 PM
thanks bro , yes u r write , thanks for response I have solve this issue as per ur advice
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide