NOT ABLE TO FIND Dial peers and gateway commands

[rshakee69]

Hi all,

I have 2951 router with "C2951-universalK9-mz-SPA.152-4.M3.bin" ios , my problem is that when I try to configure diap peers i am not seeing these command under "conf ter" , so any one have ide what is the probelem, please help me out for this issue.

I  hope i will receive solution with details .

Thanks

Rizwan

[Gabriel Saavedra]

Hi Rizwan,

If you run a "show version"  command. Can you see the UC license installed on your router?

HTH

Please rate helpful answers

Gabriel

[rshakee69]

hi Gabriel,

Thanks for reply , yes I am seening these info

License Info:

License UDI:
         
-------------------------------------------------
Device#   PID                   SN
-------------------------------------------------
*0        CISCO2951/K9          FTX1545A0QW   

Technology Package License Information for Module:'c2951'

-----------------------------------------------------------------
Technology    Technology-package           Technology-package
              Current       Type           Next reboot 
------------------------------------------------------------------
ipbase        ipbasek9      Permanent      ipbasek9
security      None          None           None
uc            None          None           None
data          None          None           None

Configuration register is 0x2102

[Jaime Valencia]

You don't have a UC license in order to configure voice related commands, you need to buy the license, install it, and then, you can configure DPs.

[Aman Soi]

Hi Rizwan,

as rightly mentioned by Jaime, u do not have Unified communications /UC license [+5].

you can generate en evaluation license and try the commands.At same time , go for permanent license.

regds,

aman

[slashdots]

Hi Rizwan,

To activate the 60-day evaluation license enter:

1. configure terminal

2. license accept end user agreement

you will find more details here:

http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html#wp1155517

[rshakee69]

thanks bro ,yes u r write , thanks for response I have solve this issue as per ur advice

[rshakee69]

thanks bro , yes u r write , thanks for response I have solve this issue as per ur advice

[rshakee69]

yes u r write , thanks for response I have solve this issue as per ur advice

[rshakee69]

thanks bro , yes u r write , thanks for response I have solve this issue as per ur advice