cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
434
Views
5
Helpful
4
Replies

Not Enough Bandwith to External Callers

Nishant Jethwa
Level 1
Level 1

CUCM version = 8.6.2

Remote Site 887 with 2 IP phones

CUCM at HQ with ADSL connection to remote site

The current location bandwidth for this site is set to only allow 2 calls to come through over the link from HQ (external call). After this is breached, the call fails. Any internal calls, they would see the 'Not Enough Bandwith" on their phone, however external callers hear three quick beeps and the call fails. Although the behaviouir is fine but due to the nature of the callers making this incoming calls, it has been asked if the audio heard by the calling party for external party can be altered or a way to at least give something meaningful to the user - even if it was to direct them to a voicemail inbox that had a recorded message that simply stated the lines are busy call later.

Nish

4 Replies 4

Chris Deren
Hall of Fame
Hall of Fame

How would you direct them to voicemail if you do not have any bandwidth? Is the VM local or centralized?

Have you looked into AAR feature?

Chris

Nishant Jethwa
Level 1
Level 1

The voicemail is centralised and not Cisco. As it happens I'm looking at an AAR document.

Just to get an idea, would AAR suit an outcome other than routing the call elsewhere?

Nish

Sent from Cisco Technical Support iPhone App

Yes, with AAR you can re-route the calls based on the AAR destination defined in CUCM to any other number.

Chris

Nishant Jethwa
Level 1
Level 1

Thanks Chris, I'll continue with this document review.

Nish

Sent from Cisco Technical Support iPhone App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: