cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 
cancel
468
Views
0
Helpful
1
Replies

number added in call called

alforkanehafid
Level 1
Level 1

Hi All,

i have th problem in the call called the number is addeed in my call called for exemple.

Called call :phone number  0661479638 to number interne 0537543175.

but in the IPPHONE i see the my number 00661479638.

i need to assit me to resolve this issue as soon as possible.

see below the debug of this call

==============================================================

Nov 28 10:42:25.741: ISDN BR0/0/0 Q931: RX <- SETUP pd = 8 callref = 0x5C
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x81
Preferred, B1
Calling Party Number i = 0x0183, '00661489895'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x81, '171'
Plan:ISDN, Type:Unknown
Nov 28 10:42:25.749: ISDN BR0/0/0 Q931: TX -> CALL_PROC pd = 8 callref = 0xDC
Channel ID i = 0x89
Exclusive, B1
Nov 28 10:42:25.761: ISDN BR0/0/0 Q931: TX -> DISCONNECT pd = 8 callref = 0xDC
Cause i = 0x809B - Destination out of order
Nov 28 10:42:26.025: ISDN BR0/0/0 Q931: RX <- RELEASE pd = 8 callref = 0x5C
Nov 28 10:42:26.025: ISDN BR0/0/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xDC
GW#
GW#
GW#
GW#
Nov 28 10:42:43.741: ISDN BR0/1/0 Q931: RX <- SETUP pd = 8 callref = 0x52
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x81
Preferred, B1
Calling Party Number i = 0x0183, '00661489895'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x81, '167'
Plan:ISDN, Type:Unknown
Nov 28 10:42:43.749: ISDN BR0/1/0 Q931: TX -> CALL_PROC pd = 8 callref = 0xD2
Channel ID i = 0x89
Exclusive, B1
Nov 28 10:42:43.809: ISDN BR0/1/0 Q931: TX -> ALERTING pd = 8 callref = 0xD2
Progress Ind i = 0x8188 - In-band info or appropriate now available
GW#
GW#
Nov 28 10:42:49.229: ISDN BR0/1/0 Q931: RX <- DISCONNECT pd = 8 callref = 0x52
Cause i = 0x8290 - Normal call clearing
Nov 28 10:42:49.229: ISDN BR0/1/0 Q931: TX -> RELEASE pd = 8 callref = 0xD2
Cause i = 0x8090 - Normal call clearing
Nov 28 10:42:49.425: ISDN BR0/1/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x52

======================================================================

Thanks in advanced

 

Best regards

Hafid

1 Reply 1

Brandon Buffin
VIP Alumni
VIP Alumni

Looks like this is an inbound call from your carrier and they are sending the leading 0. Contact the telco and ask why they are sending this additional digit.

Brandon