01-17-2014 11:06 AM - edited 03-16-2019 09:19 PM
I am an old dog in the UC world, and past versions of IOS had a limitation as to the number of voice translation rules you could have in a translation profile.
Does anyone know what the limit is for a 3925 running 15.1 series code? I have a client with a special condition where I might need upwards of a hundred rules in one profile, and don't want to crash the gateway with a test if I can already know what the limit is.
Thanks, Jeff
Solved! Go to Solution.
01-17-2014 11:32 AM
Hello Jeff
15.1(4)M which has 100 rules
Router(config)#voice translation-rule 1
Router(cfg-translation-rule)#rule ?
<1-100> Translation rule tag
Sent from Cisco Technical Support iPhone App
01-17-2014 11:32 AM
Hello Jeff
15.1(4)M which has 100 rules
Router(config)#voice translation-rule 1
Router(cfg-translation-rule)#rule ?
<1-100> Translation rule tag
Sent from Cisco Technical Support iPhone App
01-17-2014 11:58 AM
thanks folks, most appreciated.
-Jeff
01-17-2014 09:16 PM
Just remember u can have only 15 rules per translation rule. Rule 16 will not be accepted
Sent from Cisco Technical Support iPad App
09-08-2014 03:12 AM
Hi,
I have a 2960 voice gateway running 15.0(2)EX5
I cannot find the number of rules limit.
Can someone help me ??
09-08-2014 03:24 AM
Hi alainauer
Cisco 2960 is a Switch not voice gateway.
http://www.cisco.com/c/en/us/products/switches/catalyst-2960-series-switches/index.html
Grab below outpout
show tech
show tech voice
Please rate if you this post helpful.
Regards,
Mohammed Noor
09-10-2014 12:25 AM
Sorry!!!!!
I have a 2921 voice gateway with version 15.3(3)M2
01-17-2014 11:32 AM
See:
http://www.cisco.com/en/US/docs/ios-xml/ios/voice/vcr3/vcr-r1.html#wp8518966320
Scroll down to the command history table. With 15.1(4)M, the number of rules was increased from 15 to 100.
HTH
-Bill
(b) http://ucguerrilla.com
(t) @ucguerrilla
Please remember to rate helpful responses and identify helpful or correct answers.
Please remember to rate helpful responses and identify
01-18-2014 12:47 AM
thanks for the link!!!!
01-18-2014 03:32 AM
Thanks, I have had the same issue and solved now.
Regards
Rajeev
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: